The Model 40910P is particulate removing filter with 10 micron cellulose media to remove particulate from gasoline and diesel fuels when a higher cleanliness level is required. The 40910P utilizes a standard 1 inch -12 UNF mounting thread 3/4 inch flow required for most aftermarket agricultural applications. The 40910P is a particulate removing spin-on filters designed for aftermarket use on fuel dispensers, power pumps, and gravity flow applications, as well as low volume commercial and industrial applications. It utilizes an epoxy coated interior shell to eliminate oxidation which can cause pin-hole leaks from the inside. PetroClear filters are not to be used with aviation fuels. The 40910P is compatible for use with alcohol blended fuels with 15% maximum alcohol. The filter is is a particulate removal only and will not react to water that offers a 10 mciron nominal particulate removal. Phase separation will not be detected should it occur.