PRIME Switch: Forecourt Controller Backup in Seconds
The Allied PRIME Switch seamlessly switches your primary NeXGen Prime Forecourt Controller to a secondary (back-up) NeXGen Prime Forecourt Controller in a matter of seconds. The PRIME Switch allows a site to continue to function without interruption in the event the primary controller becomes inoperable.
Moreover, the PRIME Switch does NOT require a technician to be dispatched. Store personnel already onsite can simply turn the switch!
Purchase the PS-9 PRIME Switch: $795Download the Product Brief (PDF)
See the PRIME Switch in action
Watch a demonstration of how the PRIME Switch works.
What Happens When Your Forecourt Controller Goes Down?
Your forecourt controller sits between your POS and your fuel dispensers. When it stops working, the fuel side of the business stops with it. Pumps sit idle, customers drive to the next station, and you wait for a technician.
Controllers do not pick convenient times to fail. It happens on a Friday evening, on a holiday weekend, or at a 24-hour site where the nearest service tech is hours away.
The PRIME Switch gives you a second controller on standby. If the primary becomes inoperable, your staff move the site to the back-up in a matter of seconds, and the station stays open and selling fuel.
How Does the PRIME Switch Work?
The PRIME Switch sits between your site's connections and two NeXGen Prime Forecourt Controllers. Your NeXGen Prime CAT cables connect to the switch, the primary controller connects to side A and the back-up controller connects to side B.
- Normal operation. The PRIME Switch routes your site's connections to the primary NeXGen Prime controller on side A.
- The primary goes down. The primary controller becomes inoperable.
- Turn the switch. Store personnel already onsite turn the switch from the primary to the back-up.
- The back-up takes over. In a matter of seconds, the secondary NeXGen Prime controller on side B is running the site, and the site continues to function without interruption.
The switch re-routes up to 9 RJ45 ports at once: one 1GbE Ethernet port and eight serial ports supporting RS-232, RS-422 and RS-485, with support for 45mA current loop. A green LED shows A/B switch power status.
Use It as a Serial A/B Switch
The PRIME Switch is not limited to NeXGen Prime controllers. It also works as a serial A/B switch, switching up to 8 serial devices between side A and side B with a turn of the switch. Each serial port supports RS-232, RS-422 and RS-485, with support for 45mA current loop.
No Technician Required: Your Staff Turn the Switch
Without a back-up, a failed controller means a service call, and the site stays down until a technician arrives.
The PRIME Switch does NOT require a technician to be dispatched. Store personnel already onsite can simply turn the switch. No service call and no waiting. The site keeps running on the back-up controller while you sort out the primary.
Easy to Use. Robust. Built for Redundancy.
Easy to Use
- Keep your site operational with the turn of a switch
- Easily connect your NeXGen Prime CAT cables
- Small form factor
Robust
- Re-route up to 9 RJ45 ports at once
- Stamped steel chassis
- Operates from -40°F to 140°F
Redundancy
- Connected controllers ensure a mirrored configuration
- Primary and back-up controllers can have the same IP scheme
PRIME Switch PS-9 Technical Specifications
How to Order the PRIME Switch
Order part number PS-9 PRIME SWITCH for $795.
- To purchase the PS-9 PRIME Switch
- Email Allied's Sales Department at [email protected]
- Call 215-785-6200
- Or contact Allied online
Want the details on paper? Download the PRIME Switch product brief (PDF).
Frequently Asked Questions About the PRIME Switch
Don't let one controller take your whole site down
Allied Electronics, Inc. has served the retail petroleum industry from Bristol, PA since 1978. Put a back-up NeXGen Prime on standby and keep your site selling fuel with the turn of a switch.
Purchase the PS-9 PRIME Switch: $795