Credit Card Skimmer Detector: Find Skimmers in Seconds
The Skimbuster SKB-V1 is a handheld credit card skimmer detector that checks a fuel pump, ATM, POS terminal or kiosk reader for deep-insert and overlay skimmers in seconds. No tools, no teardown, no downtime, and one clear answer: skimmer detected, or no skimmer detected.
As Seen On TV
- Fox 29 Philadelphia: EBT skimming crimes prompt a Skimbuster donation to a Bristol Borough store
- NBC 10 Philadelphia: New device helps Bucks County businesses detect card skimmers
- LevittownNow.com: Grocery store gets anti-skimming tech after theft scheme thwarted
See the Skimbuster find a skimmer
A short walkthrough of a live scan, start to result.
Watch the demo videoWhy Are Card Skimmers So Hard to Find?
Modern skimmers are built to defeat a visual check. Deep-insert units sit entirely inside the card slot where nothing is visible from the outside, and overlay units are molded to match the reader they cover.
Pennsylvania State Inspector General Michelle Henry has said a skimmer can be fitted to a point-of-sale device in under four seconds, which is all the time a distracted counter needs. The same office reported that skimming drained more than $15 million in Pennsylvania SNAP benefits during 2024, and the FBI puts the national cost to consumers and financial institutions above $1 billion a year.
The usual alternatives all cost you something. Pulling a reader apart to inspect it takes the lane or the register out of service. A flashlight and a tug test finds an obvious overlay and misses everything else. Waiting for the chargebacks to arrive means your customers already paid for the discovery.
How Does the Skimbuster Credit Card Skimmer Detector Work?
You calibrate the unit once against a known-clean reader of that model, then scan. The Skimbuster reads the internal geometry of the card path and compares it to that profile, so anything added inside or over the slot shows up as a deviation.
The workflow is built for staff, not technicians:
- Four states, no interpretation: ready, calibrating, clear, detected. The result arrives as an LED, a haptic buzz and an audio cue at once.
- Per-model calibration: profiles are stored per reader model, so a Gilbarco pump reader and a checkout terminal each get judged against their own baseline.
- The reader stays live: a scan takes seconds and needs no panel opened, so lanes and registers keep transacting.
- Evidence, not recollection: every scan is geo-tagged, time-stamped and synced to the cloud, with curve data visible in the companion app.
- Built for multi-site teams: role-based access controls who can calibrate versus who can scan, and a web dashboard rolls results up across fleet, site and individual scan.
Allied Electronics trained on the device alongside law enforcement, using real recovered skimmers rather than lab samples.
Where Does the Skimbuster Work?
One unit covers the card readers a fuel or retail site actually owns: dispenser card readers on the forecourt, ATMs in the lobby, checkout POS terminals and pin pads, and unattended kiosk readers. Detection covers dip insert readers and swipe readers.
For sites already working through payment security requirements, an exportable scan log gives you a dated record of reader inspections to file against your PCI DSS 4.0 obligations. If a reader comes back flagged, the fuel dispenser card reader troubleshooting guide covers what to check next.
Skimbuster SKB-V1 Specifications
Download the Skimbuster product brief
As Seen On TV: A Bristol Borough Store Gets Ahead of Skimmers
All Fresh Supermarket on Pond Street is the only grocery store in Bristol Borough, Pennsylvania. In July and August 2026 it was hit twice by crews who worked in pairs, distracted staff, and fitted an electronic overlay straight onto a checkout card reader. Investigators confirmed the recovered devices were targeting EBT accounts. Borough police arrested 38-year-old Ionut Adrian Oprea of Florida.
Allied Electronics, Inc. donated a Skimbuster to the store, which now runs daily reader checks. CEO Mike Vogt told Fox 29 the reasoning was simple: "It's the only store in Bristol Borough, so it's where people shop every day. We wanted to bring back consumer confidence."
NBC 10 covered a demonstration of the device at the store, where Bristol Borough Police Chief Joe Moors said on camera that he intended to buy one himself. Bucks County District Attorney Joe Khan noted the case had both a suspect caught in the act and witnesses in the store.
What Does the Skimbuster Cost and How Do I Order?
The Skimbuster handheld detector, part number SKB-V1, is $450.00 and is in stock for next business day shipping while supplies last. The dashboard and mobile app license is quoted separately; contact Allied for it. Orders earn 450 Allied Advantage Points.
Set against a single skimming incident, the arithmetic is not close. One compromised reader can expose hundreds of cards before anyone notices, and the cost lands on you as chargebacks, an investigation, and customers who decide to shop somewhere else. The store in Bristol Borough saw business fall off once the incident became public.
Reach the Allied Parts Department at 215-785-6200 or 800-223-3619, or email [email protected].
* Prices subject to change without notice.
Frequently Asked Questions About Credit Card Skimmer Detectors
Check a reader before a skimmer checks your customers
Allied Electronics, Inc. has supplied petroleum and service station equipment from Bristol, PA since 1978. The Skimbuster is in stock now and ships next business day.
Talk to a Specialist