This Exxon Mobil
ANDI (Allied Network Dispenser Interface) will be configured to support
(1) Point of Sale and up to (16) fueling positions of Gilbarco dispensers,
CRIND's and the Exxon Mobil credit Network. The ANDI will be supplied with RJ45
adapters for all other communication channels. You will need to select
your POS and Gilbarco "D" box connection type, when ordering this
ANDI and any Options
that you may want to add.
- The POS
connection will either have a DB9 or a DB25 serial connection.
- The Gilbarco
"D" Box connection will either have a DB9 or a RJ45 adapter
RJ45
adapters: The ANDI will be supplied with RJ45 adapters. This will convert the DB25 connection on the ANDI
communication channels and the connections on the peripheral devices (POS,
Dispenser, Card reader, Debit security module, Tank gauge, Car wash and VSAT) to
a RJ45 connection. All of the special āpinā configurations will be inside
of the adapters. The customer must provide the CAT 5 cable (T568B Spec.) that
will be installed in between these adapters.
Options:
Additional POS
connections: ($146.00 each)
Up to (7) additional POS connections may be added to the ANDI. All POS’s
will have the ability to control fuel sales and receive data from the peripheral
devices.
Debit: ($146.00)
The Debit option may be added in order to process Debit cards at the in dispenser
card reader.
Tank Gauge: ($146.00)
The Tank Gauge option enables the POS to receive valuable information from
the Tank Gauge system.
Car Wash: ($146.00)
The Car Wash option may be added in order to prompt for Car Wash sales at
the in dispenser card reader.
Note: Contact
Allied’s Sales department for information
on ANDI configurations that are not listed in the E-Store.
Shopping Cart
