ANDI-Federated Wayne Direct up to 16FP w/CR

This Federated ANDI (Allied Network Dispenser Interface) will be connected directly to the Wayne dispensers via a Wayne Data box or a Gilbarco "D" box. The Wayne EC and PIB are not required. The "optional" Allied Electronics Isolation box may be used to connect the Wayne CAT's to the ANDI. This ANDI will be configured to support (1) Point of Sale and up to (16) fueling positions of Wayne dispensers, CAT's and Debit at the CAT's. The ANDI will be supplied with RJ45 adapters for all communication channels. You will need to select your POS connection type, when ordering this ANDI and any Options that you may want to add.

• The POS connection will either have a DB9 or a DB25 serial connection.

RJ45 adapters: The RJ45 adapters convert the DB25 connection on the ANDI communication channels and the connections on the peripheral devices (POS, Dispenser, Card reader, Tank gauge and Car wash) to a RJ45 connection. All of the special ā€œpinā€ configurations will be inside of the adapters. The customer must provide the CAT 5 cable (T568B Spec.) that will be installed in between these adapters.

Options:

Additional POS connections: ($146.00 each)
Up to (7) additional POS connections may be added to the ANDI. All POS’s will have the ability to control fuel sales and receive data from the peripheral devices.

AEIB-32: (Allied Electronics Isolation box) ($275.00)
The Allied Electronics Isolation box may be used to connect the Wayne CATs to the ANDI. Up to 30 CATs can be connected to the Isolation box. The CATs will be divided into 4 separate channels and each CAT will have an Isolation switch.

Tank Gauge: ($146.00)
The Tank Gauge option enables the POS to receive valuable information from the Tank Gauge system.

Car Wash: ($146.00)
The Car Wash option may be added in order to prompt for Car Wash sales at the in dispenser card reader.

Note: Contact Allied’s Sales department for information on ANDI configurations that are not listed in the E-Store.