This BP
ANDI (Allied Network Dispenser Interface) will be configured to support
(1) Point of Sale and up to (16) fueling positions of Tokheim dispensers, DPT's
and Debit at the DPT's. The ANDI will be supplied with RJ45
adapters for all other communication channels. You will need to select
your POS connection type, when ordering this ANDI and any Options
that you may want to add.
- The POS
connection will either have a DB9 or a DB25 serial connection.
RJ45
adapters: The ANDI will be supplied RJ45 adapters. This will convert the DB25 connection on the ANDI
communication channels and the connections on the peripheral devices (POS,
Dispenser, Card reader, Tank gauge and Network modem) to
a RJ45 connection. All of the special āpinā configurations will be inside
of the adapters. The customer must provide the CAT 5 cable (T568B Spec.) that
will be installed in between these adapters.
Options:
Additional POS
connections: ($146.00 each)
Up to (7) additional POS connections may be added to the ANDI. All POS’s
will have the ability to control fuel sales and receive data from the peripheral
devices.
Tank Gauge: ($146.00)
The Tank Gauge option enables the POS to receive valuable information from
the Tank Gauge system.
Note: Contact
Allied’s Sales department for information
on ANDI configurations that are not listed in the E-Store.
Shopping Cart
